Already have an account? Sign in
STS21 Digital Temperature Sensor offers superior performance and a space saving footprint.
Dcube Tech Ventures
MCP9808 is a highly accurate digital temperature sensor ±0.5°C I2C mini module.
CPS120 is a high quality and low cost capacitive absolute pressure sensor with fully compensated output.
HYT939 is a digital humidity sensor which works on I2C communication protocol.
H3LIS331DL is a low-power high performance 3-axis linear accelerometer belonging to the “nano” family, with digital I²C serial interface.
BMA250 is a small, thin, ultralow power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g.
Use a Particle Photon, a BME280 sensor and a cheap LCD20x4 to start your own clock-project.
SHT25 I2C Humidity and Temperature Sensor ±1.8%RH ±0.2°C I2C Mini Module.
Work in progress
Automate the opening and closing of a lightweight sliding door (e.g. a screen door), including remote controls on your phone.
This is the next step with an Particle Photon and softAP integration: cucumbers go online.
In this tutorial, we'll see how to control an Adafruit NeoPixel ring via mobile using Python and JQWidgets.
Luigi Francesco Cerfeda
Tweet your friends with only the press of a button!
The story of how to make a clock through using a LCD 1602 or LCD 2004 over I2C.
Checks if humidity threshold is reached and informs the user by using Blynk/IFTTT-services with softAP integration.
An infrared temperature sensor is suitable to signal the temperature without a touch/contact.
A water-resistant temperature sensor is suitable to signal the reaching of the core temperature of the meat during the grilling time.
Open, close and monitor a garage door opener with a smart phone using a Particle Photon and the Blynk application.
This project will allow you to connect your Particle device into an Azure IoT Hub for viewing data in real-time through an ASP.NET web app!
Read the time at night? Without glasses? Impossible? Focus on 2 light points, which will tell you the hour and the minute.
A combination of 3 different clocks in one frame.
I share my first steps with the sensor BME280 (temp / humi / pressure / altitude) and an OLED 128 * 64 px
Water fountain controlled via Particle Photon and Blynk. If the room humidity is too low, the fountain jumps to humidification.
Yet another temperature-humidity sensor publishing to dweeter, with WiFi auto-disconnect and a push button to read daily max and min values.
Giuseppe Lo Presti
With the help of Firmata, the Arduino or Particle devices control from the PC.
This shows how to program Particle Electron in Python to develop cellular-connected electronics products in a few clicks.
Photon controlled relay to turn whatever on & off. Also, avoid the hassle of a wall-wart power adapter. There are also a couple of inputs!
C. Thomas Morrison
6 station Photon controller uses the Weather Underground API to prevent watering when windy, rainy, or too cold.
Particle Photon circuit allowing the display of environmental conditions (light, temperature, humidity, pressure) using the Blynk app.
Simple GPS tracker using a Particle Photon (or Electron) and an EM406 GPS module with location visible on Blynk app map.
First test of a separate Power Supply Module 3.3V and 5V
Or connect with your social account:
New here? Create an account