Mike Soltys
Published © GPL3+

Weather Forecasting Smart Lamp

Add functionality to your bedside lamp by having it tell you the current temperature and forecast high.

IntermediateShowcase (no instructions)1 hour1,156
Weather Forecasting Smart Lamp

Things used in this project

Hardware components

Photon
Particle Photon
×1
NeoPixel Ring: WS2812 5050 RGB LED
Adafruit NeoPixel Ring: WS2812 5050 RGB LED
×2
Breadboard (generic)
Breadboard (generic)
×1
Resistor 475 ohm
Resistor 475 ohm
×1
Capacitor 1000 µF
Capacitor 1000 µF
×1

Story

Read more

Schematics

Schematic

This is a Fritzing File. But i haven't checked the resistor/capacitor values. Double check on Adafruit website to protect your neopixels!

Image of Schematic

Note: double check resistor values on Adafruit's website

Code

Smartlamp.INO

Here's the code for the photon. You might have to flash it via USB.

Credits

Mike Soltys

Mike Soltys

1 project • 1 follower
Engineer. Educator. Data Scientist.

Comments

Add projectSign up / Login