Make your hardware push data to a Google spreadsheet.
Use Pushbullet to notify you of whatever your hardware is doing
Here's an introduction to control a Nema 17 stepper motor with the help of the Adafruit TB6612 OR A4988 Stepstick OR PHPoC PES-2405 R2
Store any data you want in Google Sheets
Ask Amazon Alexa to control a light ft. NeoPixels and Particle Photon.
Use this lightweight, cross-platform editor while developing Particle software.
Locate your Particle Photons, P1s and Electrons on a map without needing extra hardware. Use Ubidots or an offline map alternative.
Develop, compile and flash Particle Photon's sketch over the cloud using Visual Studio 2015 with IntelliSense.
Share push notifications of your hardware with family or friends
Not all IoT devices are part of the Particle Cloud. Now they can be!
Connect your IoT device project to mobile phone through notifications with no pain and even no coding! Spend about 10 minutes to set it up!
Sending data to Thingspeak using Photon library without Webhook.
This project is a template for controlling a motor through a particle photon over the cloud. It can be expanded to use more motors.
Cisco Tropo is a service that makes it super easy to send text messages and make phone calls from your Particle device.
Control your Particles from all your phones and tablets
Simple project for communication between Particle Photon and NodeJS.
Do you enjoy getting a new toy? Do you hate when you get it in the mail, but then it takes forever to find a good tutorial for set up?
How a radio frequency identification (RFID) - Kit works with Particle Photon?
Get started with Particle's Photon – hugely popular for building WiFi-enabled smart homes.
Scan an NFC tag and get a temperature reading, open your garage or whatever you want.
A first introduction in gas measurement with the sensor MQ-7 for Carbon Monoxide CO and Particle Photon.
Monitor your room temperature, make use of a fan and a portable heat's pad to bring you the sleep you deserve!
Learn how to connect microcontrollers together using the CAN bus by using a simple AND gate.
We looked into using the Particle Photon to connect to our RFID badge and LCD system using an Arduino to control an IoT device.