Connect Grove LCD RGB Backlight to Particle using I2C to display time.
A first introduction in gas measurement with the sensor MQ-7 for Carbon Monoxide CO and Particle Photon.
Control one or more pins on a Particle Photon through a command-line interface written in Python.
An infrared temperature sensor is suitable to signal the temperature without a touch/contact.
A water-resistant temperature sensor is suitable to signal the reaching of the core temperature of the meat during the grilling time.
I share my first steps with the sensor BME280 (temp / humidity / pressure / altitude) and an OLED 128 * 64 px.
With the help of Firmata, the Arduino or Particle devices control from the PC.
Locate your Particle Photons, P1s and Electrons on a map without needing extra hardware. Use Ubidots or an offline map alternative.
Our spinoff on the Array of Things project, making a laser to track the activity level of areas in a high school.
🙉 A repo to show how to use Sockets with IoT devices
The connections for Hover Labs Beam with the Photon Base Shield.
A first introduction to using Hover Labs Beam.
At my age you have to get up at night and get tired on the way to the bathroom. Using a PIR-Sensor to trigger light on!
Learn how to connect microcontrollers together using the CAN bus by using a simple AND gate.
Easy way to command a RS485 Relay boards with our Rotilio board.
We looked into using the Particle Photon to connect to our RFID badge and LCD system using an Arduino to control an IoT device.
A lamp that you can turn on and off at your convenience. Left it on? No problem, a simple graph can show you whether or not you left it on!
Particle Photon with PIR Motion sensor and peizo buzzer to keep your dog from drinking out of the toilet!
Cisco Tropo is a service that makes it super easy to send text messages and make phone calls from your Particle device.
Monitor your room temperature, make use of a fan and a portable heat's pad to bring you the sleep you deserve!
Want your Rotilio to display sensor reading? An OLED LCD display integration might be the perfect solution!
Get started with Particle's Photon – hugely popular for building WiFi-enabled smart homes.
Use po-util to easily install the Particle Toolchain and build code locally.
Use this lightweight, cross-platform editor while developing Particle software.