Using a chatbot and a Nespresso machine to make coffee remotely.
Clean your yard from your smartphone or preset a job for AYSE to follow!
After flying a friends drone I was hooked. However, I wanted to build my own, so this is part one of my drone project - motor control.
Alexa controlled timers at a glimpse. A really fancy egg-timer with added temperature control.
In this project 2 Particle Photon's were used to control an RC Car in real time with the Internet of Things.
Turn on a light by focusing your mind.
A time switching, battery powered solar charger circuit for low power systems.
A capacative touch sensor allows text message feedback when an intruder enters the room as well as turning on the lights and fan.
A rather large 7-segment, 7-digit clock. Also displays local and outdoor temperature and humidity. Lots of options to tweak, too!
Using an accelerometer, we detected angular acceleration. With this data we used a particle photon to notify the user via a Blynk dashboard.
Reports real-time temperature + humidity to my cell phone and computer.
A smartphone garage door remote and status sensor using Blynk and Photon.
This is a shelf for starting plant seeds, controlled over the internet with automatic lights.
Using a particle, we connected it to an Air Ride suspension in a VW Rabbit and are able to control it through the phone.
Senor controlled DC motor with relay power switch for clutch actuator, via Photon control.
Using Gesture sensor to control an Augmented Reality Dinosaur then get teleported to the world of Dinosaurs in Virtual Reality. Stay close.
The new age home automation using pebble, Raspberry Pi and Microsoft azure.
This system simulates functions performed by the cyborg from the Empire Strikes Back.
Smart plant care system that measures and graphs, the temperature, humidity, soil moisture levels, heat index, and more.
Automating my Sonos: Connect with Denon AVR-3805 receiver through Alexa and a serial controller.
Imagine a garage door opener that can be accessed from anywhere and opens your garage when your phone is near. That dream is now a reality.
In this project we took a personal heater, two particle photons and a WeMo smart plug to make an affordable heated 3D printer enclosure.
Converting a RC car to an IoT car with a Particle Photon and controlling it with the Blynk app.
Part 2 incorporates a GPS receiver, 10 DOF IMU, and Ultrasonic distance sensor to be used for flight controls.