Measuring sound and analyzing data using the ELEGOO big sound sensor.

A simple device to detect entry into such a storage room like a pantry with only one entrance.

Have overzealous gamer siblings? Are YOU the overzealous gamer in your house? Detect and get notified of game-induced rage.

Gather timestamps on when a door of interest is opened.

A sensor that detects rain.

This will alert you when the gate is open so you can go close it.

Saving energy and your electric bill, our Motion Sensor Light can give you the piece of mind knowing you are saving energy. and your wallet.

To prevent burn injuries from hot appliance.

A home-based disaster detection and monitoring system for fire, flood, temperature, and humidity.

The purpose of this project is to detect motion in the driveway and alert the user inside the house.

Uses 2 Particle Argons to control a motion sensor, switch, and two lights that communicate with each other. For MEGR 3171 IOT Project.

Green Light... Red Light!

Use the motion detector to notify you of when your kids try to sneak-a-peek at the presents!

Smart camp that implements a safer camping experience for the environment and the camper.

Temperature, food, and water bowl level sensors to make sure your pets are taken care of when you are away.

With the utilization of particle argons and sensors, we have constructed a reversing vehicular tool!

The device will indicate the temperature inside your refrigerator/freezer in Celsius and Fahrenheit.

Forgetful roommates who don't close the fridge? Worried about keeping your food (and drinks) thoroughly cooled? Then this device is for you!

Parking Sensor using an Ultrasonic Sensor and Particle Argons.

An Interactive Lamp that can be remotely controlled by sound, motion, and touch.

The Wakeup-Inator is a system that serves as a manual alarm and the ultimate accountability partner that will ensure no man is left behind.

This is a small prototype car that uses an ultrasonic sensor so a car will turn to avoid hitting a wall with a remote on off capability.

This project used two Particle Argons, a PIR motion sensor, and a green LED to detect and notify movement.

Use Particle Argons, Blynk IoT app, and a motion sensor to activate and change colors of an LED light strip.