An automated watering system using a soil sensor to measure how dry the soil is, using an Optocoupled Relay to operate the pump.

Self measuring and watering planter

This is the Smart Room Controller project schedule that I created to organize the coding part that I focused on.

To monitor user safety, a sensor cluster collects and graphs data of obstacles in the blind spot, wheelchair speed, and degrees of tilt.

The Smart plant allows you to automate the watering of your plant with the particle Argon while measuring room and soil conditions

This project involves incorporating two particle argon devices and measuring the ideal shower temperature.

Creates a functioning automatic and manual plant watering system featuring Particle Argon, 5V power supply and sensors to activate the pump.

Smart manufacturing is all about harnessing data, here we will monitor the RPM of a lathe for maintenance

An automatic plant watering system that also collects environmental data.

With this climate monitor the temperature, pressure, and humidity can be observed for your area!

This planter can water your plants with droplets that sit on the leaves and shower the total soil area!

This project will have bi-directional communication between two Particle Argons. It will calculate the speed of a bike and graph it.

This unit captures Humidity, Temperature, CO2 (ppm), and TVOC (ppb) and sends that data to an Adafruit dashboard.

Report Temperature, Humidity, and Power Usage

This project involves utilizing two Particle Argons to sense PC Temperature and notify the user through the use of LEDs

No more need to water your plants, IoT can do it for you.

Do you ever just want to know if your pets have entered your room?

Older vehicles do not possess the same features of the vehicles of today. This simple device aims to remedy that problem with park assist.

Remotely measure the internal temperature of food and the outside temperature without the hassle of checking.

Keep track of your wandering pet as they love going outside and inside!

This is H2whoa An indoor plant watering and room monitoring system. How I put it all together.

This project uses two argons to turn on an LED light when a water level sensor senses water in a cup.

In a one-week crash course into IoT, we learned the general ideas behind the connections you can make using the internet.

I am a CNM student who has participated in the STEM Core summer program. This is my project while in the course.