Make your hardware push data to a Google spreadsheet.
Here's an introduction to control a Nema 17 stepper motor with the help of the Adafruit TB6612 OR A4988 Stepstick OR PHPoC PES-2405 R2
Use Pushbullet to notify you of whatever your hardware is doing
A first introduction in gas measurement with the sensor MQ-7 for Carbon Monoxide CO and Particle Photon.
Store any data you want in Google Sheets
Use this lightweight, cross-platform editor while developing Particle software.
We looked into using the Particle Photon to connect to our RFID badge and LCD system using an Arduino to control an IoT device.
This project is a template for controlling a motor through a particle photon over the cloud. It can be expanded to use more motors.
I share my first steps with the sensor BME280 (temp / humidity / pressure / altitude) and an OLED 128 * 64 px.
Connect your IoT device project to mobile phone through notifications with no pain and even no coding! Spend about 10 minutes to set it up!
Locate your Particle Photons, P1s and Electrons on a map without needing extra hardware. Use Ubidots or an offline map alternative.
Sending data to Thingspeak using Photon library without Webhook.
Scan an NFC tag and get a temperature reading, open your garage or whatever you want.
Simple project for communication between Particle Photon and NodeJS.
Ask Amazon Alexa to control a light ft. NeoPixels and Particle Photon.
Not all IoT devices are part of the Particle Cloud. Now they can be!
Share push notifications of your hardware with family or friends
Learn how to connect microcontrollers together using the CAN bus by using a simple AND gate.
Develop, compile and flash Particle Photon's sketch over the cloud using Visual Studio 2015 with IntelliSense.
How a radio frequency identification (RFID) - Kit works with Particle Photon?
basic setup for getting ID from RFID Card + Key Ring and display the ID to LCD with Particle Photon
Cisco Tropo is a service that makes it super easy to send text messages and make phone calls from your Particle device.
Connect Grove LCD RGB Backlight to Particle using I2C to display time.
A beginner's step-by-step guide.