This 2-part project demonstrates environment monitoring and control, as well as publish() and subscribe() data passing between 2 Argons

The City Farmer project is one that aims to use renewable energy to gather environmental data from virtually anywhere.

Smart camp that implements a safer camping experience for the environment and the camper.

This IoT project allows for the environmental conditions of two or more places to be compared at any time and chose which study friendly.

Improving Cyclist safety through real-time data logging

Using as minimal hardware as possible, this sensor reads air quality and logs it to an SD card for further analysis.

Creates a functioning automatic and manual plant watering system featuring Particle Argon, 5V power supply and sensors to activate the pump.

Never worry about forgetting to water your plants again.

Control a HVAC zone by retrofitting a manual duct damper with a damper actuator motor and installing a thermostat to control it.

Use Particle Mesh boards to collect data from all over a house. The data is then aggregated into the Particle Cloud.

Connect your Particle Photon directly to Azure IoT Hub and Azure IoT Central. Azure IoT Hub two-way messaging and direct methods supported.

Use IFTTT to automatically log data to a Google spreadsheet using a Particle Photon. This will show how I logged temperature data.

Receive notification of activity in your home. Know when unauthorized guests are in your home and when important items are tampered with.

Control your AC unit with a click of a button and manage the average temperature in your house from anywhere.

A notification system that will alert you when water is detected in any area of your home.

This is a project which helps you to detect the one who break into your rooms without your authorization.

This is a web enabled PM2.5 monitor designed to be cheap and easy to build.

This project was done as an extension of the instrumentation course that I am taking. I used the parts that come with the Particle Photon.

Monitors water level in a bucket using a water level sensor and a Particle Photon. Sends a text message when the level passes a threshold.

IOT wind generator monitoring with real time logging and display on a Wink Nimbus gauge cluster.

An air quality monitoring station that reports the PM2.5 density in the air, the Air Quality Index (AQI) via MQTT.

Sending data to Thingspeak using Photon library without Webhook.

Read multiple sensors from a Particle Photon and Publish via webhook to Thingspeak.

DHT22 sensor connected to photon transmits humidity & temperature values to spreadsheets on Google Drive.