An automated watering system using a soil sensor to measure how dry the soil is, using an Optocoupled Relay to operate the pump.
This self watering ecosystem, with room conditions ,provides the end user with a sense of calm, peace, and serenity. Take 5 mins and go deep
This 2-part project demonstrates environment monitoring and control, as well as publish() and subscribe() data passing between 2 Argons
This project used two Particle Argons, a PIR motion sensor, and a green LED to detect and notify movement.
Older vehicles do not possess the same features of the vehicles of today. This simple device aims to remedy that problem with park assist.
Temperature, food, and water bowl level sensors to make sure your pets are taken care of when you are away.
We've bought a Truck and attached some sensor to analyze its surroundings.
Green Light... Red Light!
The Smart Motion Light acts as an easy way to prevent unwanted lights left on in your house.
Automate your pet's entrance to your house and receive real time updates as to when your pet is entering and exiting.
This is a small prototype car that uses an ultrasonic sensor so a car will turn to avoid hitting a wall with a remote on off capability.
House plants are not tough like driveway weeds. House plants need lots of water and sunlight to thrive which people consistently forget.
The purpose of this project is to detect motion in the driveway and alert the user inside the house.
The City Farmer project is one that aims to use renewable energy to gather environmental data from virtually anywhere.
This project uses two argons to turn on an LED light when a water level sensor senses water in a cup.
Parking Sensor using an Ultrasonic Sensor and Particle Argons.
With the utilization of particle argons and sensors, we have constructed a reversing vehicular tool!
Forgetful roommates who don't close the fridge? Worried about keeping your food (and drinks) thoroughly cooled? Then this device is for you!
Smart camp that implements a safer camping experience for the environment and the camper.
To prevent burn injuries from hot appliance.
To monitor user safety, a sensor cluster collects and graphs data of obstacles in the blind spot, wheelchair speed, and degrees of tilt.
The device will indicate the temperature inside your refrigerator/freezer in Celsius and Fahrenheit.
Use Particle Argons, Blynk IoT app, and a motion sensor to activate and change colors of an LED light strip.
This IoT project allows for the environmental conditions of two or more places to be compared at any time and chose which study friendly.