Use of a Particle Argon to open/close a garage door with a Particle Xenon used as a mesh limit switch & smartphone control via Blynk app.
An internet connected plant watering system that monitors environmental conditions and manages soil moisture.
Imagine having the ability to detect a specific sound and triangulate its exact location.
A smart watering system that automatically waters a plant.
Training a model and then we ask the user through a GUI to enter a new x-ray image to make a prediction.
Computers at their most basic level communicate using only ones and zeros. This project sends those ones and zeros using a laser.
A motion-sensing light system that has 2-way communication between 2 Particle Argons and uploads data to ThingSpeak.
The aim of this project was to build a portable, low-cost Gas-Sensing Device that can be used to detect air pollutants from various sources.
The climate analyzer will read outdoor, bathroom, and indoor (reference) humidity.
Temperature sensor built for the MEGR 3171 IoT project
This is a temperature & relative humidity sensor and LCD display setup using two Particle Argon's and a DHT11 temperature & humidity sensor.
Do you ever forget to water your plants? because I know I do sometimes. with this system, the plant can water itself.
There's thermostats on the wall, weather apps on your phone, but is there an accurate way to measure temperature freely?
Argon micro-controller converts a 3-speed floor fan into a whole-house air circulation system. Buttons select manual/auto fan operation
An IOT-connected locking box for valuables that sends an alert and remotely sets off an alarm if moved.
Have you ever thought about how much better and happier your plant would be with the perfect amount of water all the time. Here's how!
This project is to implement a Smart Watering IoT device based on live data being monitored from multiple on board sensors.
Be able to feed your pet from anywhere, or have them feed themselves!
This project will start a 2014 Ford Fiesta remotely
Always forgetting to water your indoor herbs? With this indicator kit, you will never forget to water your plants again!
A system to automatically water your plants when the soil gets to dry. Alongside this presents various room stats via an online dashboard.
A set of blinds that will open automatically when sunlight hits a photodetector as well as open and close at a certain time.
Our project is the system that captures temperature, Humidity & occupancy data from an arbitrary room in order to reduce COVID transmission.
This project will allow ones drink to be measured in weight and temperature to ensure the drink is at their desired temperature and amount.