Monitor and log water quality (pH & ORP) and temperature from everywhere.

The goal was to make it possible to feed my cats when I'm not at home.

In this project I used a Particle Photon to control my garage door via an Android App.

Neopixel LEDs are fitted behind the guitar pickups and illuminate with the rhythm of your strumming allowing for a custom and unique design.

Web app garage door opener with up/down direction detection, https password protection, lots of error detection and activity/error logging.

Motion activated bed lighting, including an ambient light sensor, relaxing color scenes, and Adafruit.io control.

Wi-fi enabled word clock. 130 characters with 130 NeoPixels!

This setup will give live updates over WiFi as to the amount of beer in a keg by 12oz pours!

Automate the opening and closing of a lightweight sliding door (e.g. a screen door), including remote controls on your phone.

Gutters to Gardens is a solar powered rain barrel for remotely or automatically activating a water distribution system for home garden beds.

Internet-connected bathroom ventilator triggered by room humidity.

Monitor your wood stove all winter to make sure it stays in the goldilocks range so that you prevent overtiring and the fire from going out.

We replace the clunky, hard-to-use, aging controller for our home's in-ground sprinkler system and integrate it with our home automation.

This portable device is a dedicated time tracking device to help manage your time. Multiple photons are used to set up automatic triggers.

Clean your yard from your smartphone or preset a job for AYSE to follow!

After flying a friends drone I was hooked. However, I wanted to build my own, so this is part one of my drone project - motor control.

A capacative touch sensor allows text message feedback when an intruder enters the room as well as turning on the lights and fan.

The new age home automation using pebble, Raspberry Pi and Microsoft azure.

In this project we took a personal heater, two particle photons and a WeMo smart plug to make an affordable heated 3D printer enclosure.

Part 2 incorporates a GPS receiver, 10 DOF IMU, and Ultrasonic distance sensor to be used for flight controls.

Build a machine that can move a camera perfectly using the power of a webpage and even the Google Assistant with Particle.

TYP is an IoT-application based on the implementation of a Particle Photon that detects whether a certain parking lot is free or not.

Cyclists will be able to connect seamlessly to form a synchronized swarm of riders to reduce traffic congestion and improving safety.

With Lea you can automate the lights according to the brightness of the environment.