A smart home solution to all your separated "smart" devices that you can host yourself, customize, and add functionality to.

Spark Core + Camera + NodeJS = Home Security Camera

Monitor and log water quality (pH & ORP) and temperature from everywhere.

Get your essential appliances off the grid with just one solar panel

Using a small Linux SBC to replace the dashboard of my Nordic Treadmill. It set's goals and logs run and weight-loss history.

The goal was to make it possible to feed my cats when I'm not at home.

In this project I used a Particle Photon to control my garage door via an Android App.

Neopixel LEDs are fitted behind the guitar pickups and illuminate with the rhythm of your strumming allowing for a custom and unique design.

Web app garage door opener with up/down direction detection, https password protection, lots of error detection and activity/error logging.

Robotic arm controlled over the internet to perform pick and place operation.

An ambient soundtrack that reflects status and events in your physical and virtual world

Using 60 LED's facing a suitable wall, the time is projected in colour.

DroneHome ensures you'll never lose a drone (or anything else for that matter) after a fall into tall grass, a tree, bush, rooftops, whatev!

Motion activated bed lighting, including an ambient light sensor, relaxing color scenes, and Adafruit.io control.

Using sensors, this device allows you to save energy and maximize security of your household.

Wi-fi enabled word clock. 130 characters with 130 NeoPixels!

This setup will give live updates over WiFi as to the amount of beer in a keg by 12oz pours!

A mesh of open devices monitoring railway crossings "open-closed" status.

Automate the opening and closing of a lightweight sliding door (e.g. a screen door), including remote controls on your phone.

Using the Spark Core to gather plant/garden environment data then post it for storage and visualization it to a custom cloud application.

Gutters to Gardens is a solar powered rain barrel for remotely or automatically activating a water distribution system for home garden beds.

Internet-connected bathroom ventilator triggered by room humidity.

Monitor your wood stove all winter to make sure it stays in the goldilocks range so that you prevent overtiring and the fire from going out.

We replace the clunky, hard-to-use, aging controller for our home's in-ground sprinkler system and integrate it with our home automation.