Designing and construction of an air quality detector.

This project will allow you to keep your plant happy by monitoring its environment via temperature, light, and soil moisture data.

This system created using three Particle Photon 2, will add intelligence to your everyday fan and make sure your room is never hot again.

This fish tank monitoring system, based on the Particle Photon 2, transmits live tank parameters and sends alert when tank needs a cleaning.

This project is the creation of a device that can measure the depth, pH, and temperature of water using three IoT devices and sensors.

The DIY solution that provides safety in the event of a power outage.

Temperature and Humidity Room Control

Safety is one of the main issues that the hearing-impaired community struggle with! There has not been any solution yet until now.

An RC Car equipped with an impact sensor and ultrasonic distance sensor.

An easy-to-use system that counts how many pull-ups one can do in two minutes.

If your phone, watch, house, and lights can be online, why can't your tape measure? The ADTS provides a wifi enabled measurement system.

This project uses 2 piezoelectric sensors and particle photon 2 devices to generate a signal that will light an LED bulb when it is touched.

A combination of sound, light, and motion sensors to detect if you've left your lights on when they shouldn't be.

Welcome to the Smart Houseplant Watering System, a simple system designed around the soil moisture sensor.

A simple sump pump monitor based on the Particle Photon 2.

A simple temperature and humidity monitor based on the Particle Photon 2.

Use a Particle Photon 2 to show ads that change over time thanks to Asset OTA and collect impression metrics

Do you have difficulties keeping your house plants alive? this might help preventing you from over/under waterings your favourite plant.

The purpose of this project is to build a power monitor providing the user with Current, Voltage, Power and Power Factor readings.

A cute looking temperature sensor with a twist

The purpose of this project is to build a simple and robust water level sensor for monitoring water levels in domestic water tanks.

Room Occupancy Sensor using a single sensor for easy installation. This is a Particle Photon 2 tutorial.