If you're like me and haven't owned any plants in years for fear of forgetting to water them and letting them die, here's a solution!
Detects sound and airborne particulates in the air. If unsafe levels of either are present, warning lights will display.
To monitor user safety, a sensor cluster collects and graphs data of obstacles in the blind spot, wheelchair speed, and degrees of tilt.
Classify your tomatoes into Grade A, Grade B and Grade C with TensorFlow Lite and Particle Argon.
Use of a Particle Argon to open/close a garage door with a Particle Xenon used as a mesh limit switch & smartphone control via Blynk app.
The Smart plant allows you to automate the watering of your plant with the particle Argon while measuring room and soil conditions
Computers at their most basic level communicate using only ones and zeros. This project sends those ones and zeros using a laser.
A motion-sensing light system that has 2-way communication between 2 Particle Argons and uploads data to ThingSpeak.
The aim of this project was to build a portable, low-cost Gas-Sensing Device that can be used to detect air pollutants from various sources.
Creates a functioning automatic and manual plant watering system featuring Particle Argon, 5V power supply and sensors to activate the pump.
Do you ever forget to water your plants? because I know I do sometimes. with this system, the plant can water itself.
There's thermostats on the wall, weather apps on your phone, but is there an accurate way to measure temperature freely?
An IOT-connected locking box for valuables that sends an alert and remotely sets off an alarm if moved.
Argon micro-controller converts a 3-speed floor fan into a whole-house air circulation system. Buttons select manual/auto fan operation
This project is to implement a Smart Watering IoT device based on live data being monitored from multiple on board sensors.
Be able to feed your pet from anywhere, or have them feed themselves!
This project will start a 2014 Ford Fiesta remotely
With this climate monitor the temperature, pressure, and humidity can be observed for your area!
A set of blinds that will open automatically when sunlight hits a photodetector as well as open and close at a certain time.
This project will allow ones drink to be measured in weight and temperature to ensure the drink is at their desired temperature and amount.
Automatic watering system with reservoir and SMS notification on reservoir level
Dispense detergent using smart home device such as Google Home and Amazon Alexa.
This project involves utilizing two Particle Argons to sense PC Temperature and notify the user through the use of LEDs
This device helps you keep your roommate from using all the hot water while they're showering.