The Stove Safety Monitory System monitors the temperature and motion around the stove with real-life data to maintain home safety.
Golf greens often require a lot of labor in order to maintain them. This project plans to make that job easier.
An automated watering system using a soil sensor to measure how dry the soil is, using an Optocoupled Relay to operate the pump.
Older vehicles do not possess the same features of the vehicles of today. This simple device aims to remedy that problem with park assist.
Have you ever been too lazy to get up and turn on or off your lights? Then this Sound Activated LED Strip is just for you.
Detects sound and airborne particulates in the air. If unsafe levels of either are present, warning lights will display.
Do you ever just want to know if your pets have entered your room?
This project uses two argons to turn on an LED light when a water level sensor senses water in a cup.
Be able to feed your pet from anywhere, or have them feed themselves!
A motion-sensing light system that has 2-way communication between 2 Particle Argons and uploads data to ThingSpeak.
To monitor user safety, a sensor cluster collects and graphs data of obstacles in the blind spot, wheelchair speed, and degrees of tilt.
Always forgetting to water your indoor herbs? With this indicator kit, you will never forget to water your plants again!
The aim of this project was to build a portable, low-cost Gas-Sensing Device that can be used to detect air pollutants from various sources.
Creates a functioning automatic and manual plant watering system featuring Particle Argon, 5V power supply and sensors to activate the pump.