Stuck at home in lockdown and needed a way to connect my old bicycle and old indoor trainer to my fitness watch / phone via bluetooth.

For work every now and then I have to enroll up to 200 Chromebooks/Chromebits/Chromeboxes, so I wrote a script that does just that.

A capacative touch sensor allows text message feedback when an intruder enters the room as well as turning on the lights and fan.

The device uses cheap, off the shelf components to provide live data on stream and river conditions like stage, temp, and conductivity.

Using sensors, this device allows you to save energy and maximize security of your household.

This setup will give live updates over WiFi as to the amount of beer in a keg by 12oz pours!

Solar-powered laser rangefinder to log river levels to the cloud for flash flood warning and kayak trip planning.

This project in order to evaluate the pH value of the soil which reacts with a substrate and changes its color.

Simple and effective way to keep your apartment secure. Receive live feed and updates relating to activity within your apartment.

Monitor your daily water usage, donate water for remote areas, crop plantation using IoT.

A project that uses the Particle Photon to make it possible to open the door by just pressing a button on your computer keyboard.

My iRobot got fried when it got wet from rain coming in the window..I HACKED IT using Particle, STM32 dev board and Adacore

Our IoT project utilizes ultrasonic sensor technology to create a modern-day measuring tape.

After researching the Sonoff WiFi switch, I decided to build my own switch box mountable 120V input IoT switch.

Home security alert system which remotely detects motion at your door and notifies you when someone enters your home!

This project is meant to give users the ability to have temperature dependent fan speed while working out.

The ability to mass produce and create a large scale swarm with interchangeable pieces for a variety of purposes and algorithms.

I.S.I is an intelligent gravity infusion stand that provides information about the state of its infusion.

These sensors aim to measure temperature, humidity, and CO2 levels in two separate areas to determine which is better for athletic activity.

A reminder with lights and notification. If it's a specific time during the day, it will light up different colors with a notification.

Control the position of a microphone stand remotely through Blynk.

A room monitoring system notifies a guard and allows him to respond quickly. The entire system can be monitored by a command room.

Set up a device in your cabinet to notify you when to wash your dishes. This device requires the Particle Argon or Photon.

Using a Particle Argon and a motion sensor I created a device that sends me a message whenever someone enters the house.