Automatic lights in your house may sound futuristic, but with this design it can easily be implemented in any room.

This project is an alarm system for while you are away that tracks changes in sound, light, and motion, and implements the use of Photon 2s.

This project is a monitoring system for your car that checks the temperature, carbon monoxide levels, and movement inside the car.

This project had the purpose of creating a parking sensor that uses an ultrasonic sensor and a RGB led light. Micah Ollis and Gavin Awtrey.

To monitor user safety, a sensor cluster collects and graphs data of obstacles in the blind spot, wheelchair speed, and degrees of tilt.

This project fixed my problems with hot and cold rooms and logs details about how it was done, to compare to my ecobee4 thermostat details.

Our project makes life easier by letting the dog feed itself when needed.

A motion-sensing light system that has 2-way communication between 2 Particle Argons and uploads data to ThingSpeak.

The kitchalarm notifies you when your kitchen is empty so that you don't have to stop working to check for yourself.

Always forgetting to water your indoor herbs? With this indicator kit, you will never forget to water your plants again!

The Stove Safety Monitory System monitors the temperature and motion around the stove with real-life data to maintain home safety.

Have you ever been too lazy to get up and turn on or off your lights? Then this Sound Activated LED Strip is just for you.

Older vehicles do not possess the same features of the vehicles of today. This simple device aims to remedy that problem with park assist.

Do you ever just want to know if your pets have entered your room?

This project uses two argons to turn on an LED light when a water level sensor senses water in a cup.

I am a participant in the 2023 STEM Core Summer Bridge Program and we learned IOT, programming in C and C++ and attached a sonar sensor.