An easy-to-use system that counts how many pull-ups one can do in two minutes.

A wireless way for blinds to open, based off both motion and the amount of light outside.

An RC Car equipped with an impact sensor and ultrasonic distance sensor.

A combination of sound, light, and motion sensors to detect if you've left your lights on when they shouldn't be.

Send and receive sound between Particle Photons, using microphones and speakers from Adafruit! Easy and fun, 1 day build or faster.

My aim is to minimize the loss of electricity there is when people forget to switch off their fans or lights, through smart home solution.

An IoT device used to check the humidity levels of your houseplants. Low powered, rechargeable, and powered by Particle's Mesh devices.

A solar-powered IoT device for monitoring sound level, air quality, humidity, and temperature.

Measure wind, rain, temperature, humidity, and light in remote locations using ThingSpeak, Particle, and the Sentient Things IoT Node.

Read multiple sensors from a Particle Photon and Publish via webhook to Thingspeak.

Control NeoPixels from the cloud! Connect them to anything! Trigger from your IOS/Android/Web and even Android Wear. Uses Photon or Core.

Use IFTTT to automatically log data to a Google spreadsheet using a Particle Photon. This will show how I logged temperature data.

Use NFC stickers to track electronic components with the use of a Particle Photon and a database back-end, along with a webpage interface.

This device automatically detects and uploads the location of road hazards, creating a safer driving environment!

Convert a cheap smoke detector with Bluz DK to a useful IoT device.

No, this is not our plant, but it will be yours if you leave it unattended. Here's a way to keep it healthy with minimal effort.

Use your Arduino Nano or Particle Photon board and build a binary Nixie clock with 18 x IN-2 Nixie tubes.

How to apply a TinyML approach to prevent electrical grid overloads.

Detect gas, carbon monoxide, motion and water leaks with this multipurpose project.

An IoT smart mailbox for securely receiving parcels and getting notification on app without being present at home.

Build your own automatic IoT plant irrigation system with soil sensor, Particle Photon, relay and immersible water motor.

To prevent burn injuries from hot appliance.

This project will demonstrate the real prototype of smart cities product including sensor data manipulation using Google Data Studio.

By using IFTTT, the Google Assistant API, and a Particle Photon, you can make a machine that gives out candy upon your request!