Internet of Trees – Soil Saturation Monitor Using Particle, Azure, and Power Bi

Build your own automatic IoT plant irrigation system with soil sensor, Particle Photon, relay and immersible water motor.

This is a pair of sensors that collect the temperature and humidity of a location, along with the soil moisture of a particular plant.

Don't you just hate when you buy a nice house plant, forget to water it and within a week or two it dies. We have a solution for you!

Ping me to water my basil plant when the soil moisture gets too low.

Stay informed about soil-measurement by using Particle Photon.

Get a text or call if your plant is getting too dry, along with a nice LCD display giving information regarding your plant's health.

This is the next step with an Particle Photon and softAP integration: cucumbers go online.

Simple way to monitor your plant's Moisture Levels and water from afar.

Moisture sensor tells an LED to blink and uses IFTTT to send an message to your phone when your plant needs water.

This project uses a soil moisture sensor to sense when your yard or plants need watering, and then turns on your sprinklers accordingly.

I was tired of using push-in boards and jumpers for my projects, so I developed a shield for the Particle Electron.

Have a plant that needs watering? Going on vacation soon and have nobody to water it? Then this is the project for you.

Let's build an IoT Plant Watering system for your household plant using a low cost Particle Photon and a servo motor