IKEA PS 2014 Pendant Lamp Modification

With the wave of your hand, the Holocron opens up keeping you on the light-side.

Wear helmets & speak Droid to each other! Everyone hears droid "language" but wearers of the helmets hear each others' actual voice instead!

Control all of your Things using "The Force." Also monitor your "Force" activity with ubidots.

A simple build-your-own environment monitor for your home. This project uses Particle Photon, sensors from Adafruit, and a 3D-printed case.

An inexpensive open-source home automation solution for low income individuals.

Fed up of getting up to close the door? Want to be able to close the door by talking to the room? If you answered yes then read on!

Drip is a low-cost, efficient precision irrigation system that was designed to service the needs of farmers in developing nations.

This painting change in each moment as new.

I need a quick and simple temp/humidity monitor for a baby room to post and monitor through a dashboard.

How to build a DIY Wi-Fi gas detector that sends SMS alerts using a Particle Photon, a gas sensor and a buzzer

Using a standard water meter with pulse output, counts the pulses to measure the volume and cost of water used.

A device made with a bar graph and a Particle Photon to show the WiFi strength.

Robust weatherproof solar powered weather station. Uploads to Weather Underground via WiFi.

Ever wanted to build an LED Mask? Here's how I built mine! Maybe it will spark your imagination.

Using a Particle Photon, this project allows you to remotely control your standing V3 GeekDesk.

Using an accelerometer, we detected angular acceleration. With this data we used a particle photon to notify the user via a Blynk dashboard.

Level Monitor for extremely dusty environments or where other distance sensors don’t work.

Door controller intended for secure and reliable operation of house garage door. Powered by Particle Photon, MQTT and openHAB.

Yet Another Particle Garage Opener

A meter that indicates the Wi-Fi signal strength in an intuitive way, using the parts I had on hand.

Control any high voltage (240V, 15A) load whilst monitoring two external sensors and current drawn by load. No additional PSU needed.

Get notified when the doorbell is pressed for about 1/6 the price of the RING doorbell!

Place a card on RFID reader and power the desktop ON/OFF.