A project to see when to water a plant

See Mars's Average Pressure, visualized using a servo motor.

The Recon droid will detect the rebel scum and report back to the Empire. Control movement through Bluetooth or Wi-Fi.

We replace the clunky, hard-to-use, aging controller for our home's in-ground sprinkler system and integrate it with our home automation.

No 9000 series computer has ever made a mistake. Putting that theory to the test. A 2019 odyssey to monitor and control garage doors.

Turn commercial holiday lights into an display synchronized to music.

Monitors the Open/Close status of multiple garage doors alerting via SMS/Text if any left open too long

SparkFun Particle weather shield + Particle Photon + Weather Underground

Wi-fi enabled word clock. 130 characters with 130 NeoPixels!

The ability to mass produce and create a large scale swarm with interchangeable pieces for a variety of purposes and algorithms.

A project that uses the Particle Photon to make it possible to open the door by just pressing a button on your computer keyboard.

A reminder with lights and notification. If it's a specific time during the day, it will light up different colors with a notification.

Simple motion detection that logs movement into a Google Sheet. Requirements: Photon, PIR Motion Sensor, IFTTT, and Google Sheets,

This project is meant to give users the ability to have temperature dependent fan speed while working out.

This portable device is a dedicated time tracking device to help manage your time. Multiple photons are used to set up automatic triggers.

I created a robot arm at a hackathon that uses a Photon Redboard, and an Adafruit Motor Shield. The arm will be controlled with a gamepad.

Gutters to Gardens is a solar powered rain barrel for remotely or automatically activating a water distribution system for home garden beds.

Control a hospital bed with WiFi or even voice, allowing individuals with disabilities to become more comfortable throughout the night.

I.S.I is an intelligent gravity infusion stand that provides information about the state of its infusion.

With N2L you are able to find fast and easy a learning spot as you desire.

My iRobot got fried when it got wet from rain coming in the window..I HACKED IT using Particle, STM32 dev board and Adacore

After researching the Sonoff WiFi switch, I decided to build my own switch box mountable 120V input IoT switch.

Clean your yard from your smartphone or preset a job for AYSE to follow!

Parachute velocity is a metric that hasn't been properly measured in the skydiving community. The Parachute Speedometer does just that.