Manually counting people going in and out isn't so easy, and it isn't always very accurate numbers. My solution is automation with style!

An internet connected plant watering system that monitors environmental conditions and manages soil moisture.

Monitors a leopard trap door and occupancy by means of internal or external sensors.

Measure wind, rain, temperature, humidity, and light in remote locations using ThingSpeak, Particle, and the Sentient Things IoT Node.

Using sensors, this device allows you to save energy and maximize security of your household.

This project will demonstrate the real prototype of smart cities product including sensor data manipulation using Google Data Studio.

Control a HVAC zone by retrofitting a manual duct damper with a damper actuator motor and installing a thermostat to control it.

Do you want to save energy? You are on the right place.

This device monitors the total current coming into your home and performs and FFT on it to determine what appliances are running.

An IoT device used to check the humidity levels of your houseplants. Low powered, rechargeable, and powered by Particle's Mesh devices.

Make your fridge smart with a few sensors and actuators.

Robust weatherproof solar powered weather station. Uploads to Weather Underground via WiFi.

Gutters to Gardens is a solar powered rain barrel for remotely or automatically activating a water distribution system for home garden beds.

My aim is to minimize the loss of electricity there is when people forget to switch off their fans or lights, through smart home solution.

The aim is to supervise solar photovoltaic power generation to enhance the performance, monitoring and maintenance of the solar plant.

The Temperature Mirror incorporates a digital display to allow its user to readily view time, temperature, humidity, and light.

Notifications aren't just for email any more! Get real time alerts from a solar powered Particle Argon with IFTTT.

Redneck project by a redneck team.

Automated soil moisture management

IOT wind generator monitoring with real time logging and display on a Wink Nimbus gauge cluster.

The purpose of this project is to two DS18B20 temperature sensors, with one outside and one inside.

Smart, internet connected hot tub control system. Increase energy efficiency and convenience through better control and logic.

Health monitoring system for plants.

Easy to print, control & extend, treaded vehicle. And with the onboard wireless power component, you can charge the tank while parked.