An automated watering system using a soil sensor to measure how dry the soil is, using an Optocoupled Relay to operate the pump.
This self watering ecosystem, with room conditions ,provides the end user with a sense of calm, peace, and serenity. Take 5 mins and go deep
This 2-part project demonstrates environment monitoring and control, as well as publish() and subscribe() data passing between 2 Argons
This project used two Particle Argons, a PIR motion sensor, and a green LED to detect and notify movement.
Have you ever been too lazy to get up and turn on or off your lights? Then this Sound Activated LED Strip is just for you.
Older vehicles do not possess the same features of the vehicles of today. This simple device aims to remedy that problem with park assist.
Temperature, food, and water bowl level sensors to make sure your pets are taken care of when you are away.
The Stove Safety Monitory System monitors the temperature and motion around the stove with real-life data to maintain home safety.
We've bought a Truck and attached some sensor to analyze its surroundings.
Green Light... Red Light!
The Smart Motion Light acts as an easy way to prevent unwanted lights left on in your house.
Have you ever had a problem keeping your plant at home healthy? Check out this monitoring system to ensure a healthy plant life.
Let your engine breathe a little easier.
Automate your pet's entrance to your house and receive real time updates as to when your pet is entering and exiting.
Sustainable platform of sensing and irrigation automation based around the SenseCAP K1100 with predictive analysis via the Helium Network.
Detects sound and airborne particulates in the air. If unsafe levels of either are present, warning lights will display.
This project tracks customer traffic in and out of a shop.
This is a small prototype car that uses an ultrasonic sensor so a car will turn to avoid hitting a wall with a remote on off capability.
The dash sensor reads light, temperature, and acceleration, these readings will lead to a better understanding of the user's surroundings.
House plants are not tough like driveway weeds. House plants need lots of water and sunlight to thrive which people consistently forget.
The purpose of this project is to detect motion in the driveway and alert the user inside the house.
An alarm clock that can be snoozed remotely via detection from an IR motion sensor and can report the weather by using a solar panel.
An easy way to unlock your door by simply standing near it or using your phone or a button.