Power
Published © Apache-2.0

Turning a Fridge Smart

Make your fridge smart with a few sensors and actuators.

BeginnerFull instructions provided2 hours844
Turning a Fridge Smart

Things used in this project

Hardware components

Fridge
×1
Photon
Particle Photon
×1
Breadboard (generic)
Breadboard (generic)
×1
Seeed Grove - Buzzer
×1
Grove - Infrared Temperature Sensor
Seeed Grove - Infrared Temperature Sensor
×1
PIR Motion Sensor (generic)
PIR Motion Sensor (generic)
×1
Reed Switch
×1
Resistor 5k ohm
To use with the reed switch.
×1
Jumper wires (generic)
Jumper wires (generic)
To use when you need to extend the distance between the breadboard and a sensor/actuator.
×1

Software apps and online services

Particle Build Web IDE
Particle Build Web IDE
Particle CLI

Story

Read more

Schematics

Reed Switch Test

The configuration for testing the reed switch only.

Temperature Sensor Test

The configuration for testing the temperature sensor only.

Buzzer Actuator Test

The configuration for testing the buzzer actuator only.

PIR Sensor Test

The configuration for testing the PIR sensor only.

Final Setup

The final configuration.

Code

Smart Fridge Script

The script to deploy onto a Particle Photon in order to control the sensor and actuators in the smart fridge.

Credits

Power

Power

1 project • 3 followers

Comments

Add projectSign up / Login