Using this setup, we will successfully measure shower temperature and alert the user that the shower is ready.
Control your coffee pot remotely. Receive a signal when complete.
Using Wi-Fi and myoelectric technology, Pelop's Hand was designed as a low-cost prosthetic concept to emulate the squeezing of one's hand.
Takes the difference between two temperature sensors and texts the results to your phone.
Curtains are such a hassle to move. Here is an easy way to save yourself all that energy.
Ever wanted a temperature sensor that can read the food's temperature? Look no further, this amazing new product is tailored just for you.
Using a particle, we connected it to an Air Ride suspension in a VW Rabbit and are able to control it through the phone.
With Safe Alarm, you will always have a sense of security knowing your valuables are kept at close watch.
Use this lightweight, cross-platform editor while developing Particle software.
First impressions of a Raspberry Pi connected to the Particle Cloud.
By using your phone you can make is so that you can change your temperature of your old stick thermostat from anywhere.
Add some sound FX to your electric fireplace!
This project is for the assistance of blind and hard of seeing enabling them to find their way with alerts and voice directions.
A device that you rely on everyday in order to save you time to go back home if you forget anything important back in your house.
basic setup for getting ID from RFID Card + Key Ring and display the ID to LCD with Particle Photon
With the use of 2 Photons and wireless technology, you can relax while Shotomatic pours a shot of your favorite drink for you.
Ever wondered what to wear due to unpredictable weather Wonder no longer!
This is a basic setup to display messages with SunFounder IIC I2C TWI Serial 2004 20x4 LCD Module Shield.
When it comes to weapons there is always room for more safety. Give yourself some needed piece of mind with an extra layer of security.
This laser tripwire calls Owen's phone to tell him someone set off the tripwire whenever the light sensor is interrupted by someone.
A simple project that utilizes 2 Photons and a temperature sensor to set off an alarm when a device gets too hot.
This project describes how to build an Arduino-based, text-controlled gum dispenser. Idea from Make Maagazine "Secret Knock Gumball Machine"
What if you didn't have to get up to make a cup of coffee? What if you could turn on your coffee machine from your phone?
Or connect with your social account:
New here? Create an account