AARYA BRAHMANE
Published © LGPL

Lazy Ferrari

Want to pass something over to a friend without getting up? Lazy Ferrari is there to help you!

IntermediateWork in progress4 hours764
Lazy Ferrari

Things used in this project

Hardware components

Photon
Particle Photon
×1
Dual H-Bridge motor drivers L293D
Texas Instruments Dual H-Bridge motor drivers L293D
×1
GoPiGo Robot Base Kit
Dexter Industries GoPiGo Robot Base Kit
CHASIS, WHEELS,
×1
Android device
Android device
×1

Software apps and online services

Blynk
Blynk

Story

Read more

Schematics

L293D INTERFACING

CONNECTING MOTOR TO PARTICLE
L293dparticle jb7oiuoxqg

Code

MOTOR CONTROL

C Header File
code using l293d and also link of using with seeed motor shield
#include "SeeedMotorShield.h"
#include "application.h"

/*----Ardunio to Shield Pinout Controls-----

Are using a Seeed motor shield to drive 2 DC motors
Seeed motor shield uses Arduino pins 8->13
Pin 9 sets the enable and speed of shield outputs 1 & 2
Pin 10 sets the enable and speed of shield outputs 3 & 4
Pin 8 from Uno controls the state of shield output 1
Pin 11 from Uno controls the state of shield output 2
Pin 12 from Uno controls the state of shield output 3
Pin 13 from Uno controls the state of shiled output 4

*/

void SeeedMotorShield::begin() {

    leftmotorForward = D0; // pin 8 --- left motor (+)
    leftmotorspeed = D1; // pin 9 --- left motor speed signal
    rightmotorspeed = D2; // pin 10 --- right motor speed signal
    leftmotorBackward = D3; // pin 11 --- left motor (-)
    rightmotorForward = D4; // pin 12 --- right motor (+)
    rightmotorBackward = D5; // pin 13 --- right motor (-)

    pinMode(leftmotorForward, OUTPUT);
    pinMode(leftmotorBackward, OUTPUT);
    pinMode(leftmotorspeed, OUTPUT);
    pinMode(rightmotorForward, OUTPUT);
    pinMode(rightmotorBackward, OUTPUT);
    pinMode(rightmotorspeed, OUTPUT);
}

void SeeedMotorShield::goForward(int motor, int speed){
    if(motor == 0){
        analogWrite(leftmotorspeed,speed);
        digitalWrite(leftmotorForward,LOW);
        digitalWrite(leftmotorBackward,HIGH);
    }
    else if (motor == 1) {
        analogWrite(rightmotorspeed,speed);
        digitalWrite(rightmotorForward,LOW);
        digitalWrite(rightmotorBackward,HIGH);
    }
}

void SeeedMotorShield::turnLeft(int speed){
    goBackward(MOTORB, speed);
    goForward(MOTORA, speed);
}

void SeeedMotorShield::turnRight(int speed){
    goBackward(MOTORA, speed);
    goForward(MOTORB, speed);
}

void SeeedMotorShield::goBackward(int motor, int speed) {
    if(motor == 0){
        analogWrite(leftmotorspeed,speed);
        digitalWrite(leftmotorBackward,LOW);
        digitalWrite(leftmotorForward,HIGH);
    }
    else if (motor == 1) {
        analogWrite(rightmotorspeed,speed);
        digitalWrite(rightmotorBackward,LOW);
        digitalWrite(rightmotorForward,HIGH);
    }
}

void SeeedMotorShield::Stop(int motor) {
    if(motor == 0){
        digitalWrite(leftmotorspeed,LOW);
    }
    else if (motor == 1) {
        digitalWrite(rightmotorspeed,LOW);
    }
    
}

Credits

AARYA BRAHMANE

AARYA BRAHMANE

4 projects • 3 followers
LEARNING | UNDERSTANDING | DEVELOPING

Comments

Add projectSign up / Login