Control a HVAC zone by retrofitting a manual duct damper with a damper actuator motor and installing a thermostat to control it.

To monitor user safety, a sensor cluster collects and graphs data of obstacles in the blind spot, wheelchair speed, and degrees of tilt.

A home-based disaster detection and monitoring system for fire, flood, temperature, and humidity.

Home security alert system which remotely detects motion at your door and notifies you when someone enters your home!

Measuring sound and analyzing data using the ELEGOO big sound sensor.

Use Particle Argons, Blynk IoT app, and a motion sensor to activate and change colors of an LED light strip.

To prevent burn injuries from hot appliance.

Wanna spy on your significant other, creep out your roommates, or figure out who's stealing all your beer? This motion detector will help!

Creates a functioning automatic and manual plant watering system featuring Particle Argon, 5V power supply and sensors to activate the pump.

The purpose of this project is to detect motion in the driveway and alert the user inside the house.

Using a Particle Argon and a motion sensor I created a device that sends me a message whenever someone enters the house.

A better mousetrap using a particle for detection and remote status.

Improving Cyclist safety through real-time data logging

Gather timestamps on when a door of interest is opened.

Never worry about forgetting to water your plants again.

Green Light... Red Light!

Using as minimal hardware as possible, this sensor reads air quality and logs it to an SD card for further analysis.

A sensor that detects rain.

A simple device to detect entry into such a storage room like a pantry with only one entrance.

The device will indicate the temperature inside your refrigerator/freezer in Celsius and Fahrenheit.

Have overzealous gamer siblings? Are YOU the overzealous gamer in your house? Detect and get notified of game-induced rage.

Parking Sensor using an Ultrasonic Sensor and Particle Argons.

Using a metal touch sensor, I've essentially made a button that notifies the user when it's been released over a certain time threshold.

This will alert you when the gate is open so you can go close it.