This 2-part project demonstrates environment monitoring and control, as well as publish() and subscribe() data passing between 2 Argons

The City Farmer project is one that aims to use renewable energy to gather environmental data from virtually anywhere.

Smart camp that implements a safer camping experience for the environment and the camper.

This IoT project allows for the environmental conditions of two or more places to be compared at any time and chose which study friendly.

Improving Cyclist safety through real-time data logging

Using as minimal hardware as possible, this sensor reads air quality and logs it to an SD card for further analysis.

Creates a functioning automatic and manual plant watering system featuring Particle Argon, 5V power supply and sensors to activate the pump.

Never worry about forgetting to water your plants again.

This is a web enabled PM2.5 monitor designed to be cheap and easy to build.

Monitors water level in a bucket using a water level sensor and a Particle Photon. Sends a text message when the level passes a threshold.

How to build a DIY Wi-Fi gas detector that sends SMS alerts using a Particle Photon, a gas sensor and a buzzer

Build an Android or iOS app for your hardware with no coding!

Miniature WiFi weather station made to feed data from a terrarium.

Spark Core / Photon / Electron Water Sensor with SMS alerts via Twilio or any webhook via IFTTT

Control a HVAC zone by retrofitting a manual duct damper with a damper actuator motor and installing a thermostat to control it.

Get notified of a water leak wherever you are

Use Particle Mesh boards to collect data from all over a house. The data is then aggregated into the Particle Cloud.

Connect your Particle Photon directly to Azure IoT Hub and Azure IoT Central. Azure IoT Hub two-way messaging and direct methods supported.

This is a project which helps you to detect the one who break into your rooms without your authorization.

Use IFTTT to automatically log data to a Google spreadsheet using a Particle Photon. This will show how I logged temperature data.

IOT wind generator monitoring with real time logging and display on a Wink Nimbus gauge cluster.

Sending data to Thingspeak using Photon library without Webhook.

An air quality monitoring station that reports the PM2.5 density in the air, the Air Quality Index (AQI) via MQTT.

Read multiple sensors from a Particle Photon and Publish via webhook to Thingspeak.