If you're like me and haven't owned any plants in years for fear of forgetting to water them and letting them die, here's a solution!
Detects sound and airborne particulates in the air. If unsafe levels of either are present, warning lights will display.
Imagine having the ability to detect a specific sound and triangulate its exact location.
Use of a Particle Argon to open/close a garage door with a Particle Xenon used as a mesh limit switch & smartphone control via Blynk app.
An internet connected plant watering system that monitors environmental conditions and manages soil moisture.
A smart watering system that automatically waters a plant.
Training a model and then we ask the user through a GUI to enter a new x-ray image to make a prediction.
Computers at their most basic level communicate using only ones and zeros. This project sends those ones and zeros using a laser.
A motion-sensing light system that has 2-way communication between 2 Particle Argons and uploads data to ThingSpeak.
The aim of this project was to build a portable, low-cost Gas-Sensing Device that can be used to detect air pollutants from various sources.
The climate analyzer will read outdoor, bathroom, and indoor (reference) humidity.
Temperature sensor built for the MEGR 3171 IoT project
This is a temperature & relative humidity sensor and LCD display setup using two Particle Argon's and a DHT11 temperature & humidity sensor.
Do you ever forget to water your plants? because I know I do sometimes. with this system, the plant can water itself.
There's thermostats on the wall, weather apps on your phone, but is there an accurate way to measure temperature freely?
An IOT-connected locking box for valuables that sends an alert and remotely sets off an alarm if moved.
Argon micro-controller converts a 3-speed floor fan into a whole-house air circulation system. Buttons select manual/auto fan operation
Have you ever thought about how much better and happier your plant would be with the perfect amount of water all the time. Here's how!
This project is to implement a Smart Watering IoT device based on live data being monitored from multiple on board sensors.
Be able to feed your pet from anywhere, or have them feed themselves!
Always forgetting to water your indoor herbs? With this indicator kit, you will never forget to water your plants again!
This project will start a 2014 Ford Fiesta remotely
A set of blinds that will open automatically when sunlight hits a photodetector as well as open and close at a certain time.
Our project is the system that captures temperature, Humidity & occupancy data from an arbitrary room in order to reduce COVID transmission.